A charging hub can hold three flight batteries and still charge only one at a time. The plastic shape tells you how many batteries fit. It does not tell you how the hub distributes power.
That distinction matters when you are planning a morning flight. If you assume three occupied slots mean three batteries will finish together, the second and third battery may still be waiting when you need to leave.
Many hubs work in sequence
DJI’s current aircraft battery charging guide says that, when a compatible charging hub is used, batteries are generally charged in sequence according to their power level, from high to low. For the Air 3 series, DJI states that the battery with the highest remaining charge is handled first, followed by the others.
This order is useful: it can make one flyable battery available sooner instead of spreading limited input power across every slot. But it also means total turnaround cannot be estimated by taking the single-battery charging time and assuming the whole hub will finish in that period.
DJI describes the Avata 2 Two-Way Charging Hub in the same basic way: it can hold three batteries, but its specification says they are charged in sequence. The hub can also serve as a power bank, which is a separate function and should not be confused with simultaneous battery charging.
The charger can change the logic
Not every hub follows the same rule under every power input. DJI’s charging-hub indicator guide gives a useful exception for the DJI Flip Parallel Charging Hub. With less than 65 W, that hub charges in sequence from the highest battery level to the lowest. With a 65 W or higher charger, it can charge two batteries simultaneously after first balancing the relevant battery levels.
The lesson is not that 65 W is a universal threshold. It is a product-specific rule. A hub, cable and power adapter must all support the required protocol and output, and the aircraft maker’s manual remains the controlling source. A high number printed on an adapter does not force an incompatible hub to accept more power.
Power-accumulation features are another source of confusion. DJI says the Air 3 hub can move remaining energy from several lower-charge batteries into the battery with the highest charge. That can concentrate usable energy, but it is not the same operation as charging every battery from the wall.
Plan from the manual and the LEDs
Before relying on a hub for a job, check four things: the exact hub model, the supported adapter and cable, the charging sequence, and what each LED pattern means. Then observe one complete charging cycle before using the manufacturer’s fastest quoted time as a planning assumption.
- Do not mix batteries or chargers that the manufacturer does not list as compatible.
- Allow for the number of batteries, their starting charge and the hub’s stated order.
- Keep charging equipment ventilated and follow the battery safety instructions.
- Confirm the required batteries are actually full before travelling, rather than inferring it from elapsed time.
A multi-slot hub is mainly a workflow tool. It reduces cable swapping and can prioritise the next useful battery. Whether it charges one, two or more batteries at once is a specification to verify, not a conclusion to draw from the number of slots.
Sources and editorial notes
- DJI, Aircraft Battery Charging Guide.
- DJI, Charging Hubs for Camera Drones: Indicator Blinking Patterns.
- DJI Store, DJI Air 3 Series Battery Charging Hub and DJI Avata 2 Two-Way Charging Hub.
Sources checked: 2026-11-16. Charging behaviour varies by hub, battery, cable, adapter and firmware. This article does not report a laboratory charging test and does not replace the manual for a specific product.
Leave a Reply